Lou Essentials is reader-supported. As an Amazon Associate we earn from qualifying purchases.
Health & Safety · Equipment · NLVYPRO
NLVYPRO Desktop Fume Extractor, 105W, 255 m³/h, 3-Layer Filtration
A reasonable add-on if you want source capture at one nail table and the listing's 255 m³/h is enough for your setup. It does not replace room ventilation, and its listing is written mostly for soldering smoke.
The short answer
A desktop fume extractor for nail salon tables: 255 m³/h, 105W, 3-layer filters. It is listed mainly for soldering and does not replace room ventilation.
- Best for
- Source capture of vapors and dust at a single nail table
- Format
- Desktop · 105W brushless · 255 m³/h · 3-layer, 13 filters
- Watch for
- Listed mainly for soldering smoke; no nail-product test data
As an Amazon Associate we earn from qualifying purchases. Click through to Amazon for the live price. We do not display Amazon prices on this site.
Disclosure. Every Amazon link on this page is an Associates affiliate link. As an Amazon Associate we earn from qualifying purchases — at no extra cost to you.
What it is
The NLVYPRO desktop fume extractor lists an airflow of 255 m³/h (about 150 CFM) from a 105W brushless motor, an LCD display, a remote control and a 3-layer filtration system with 13 filters. The title says it is suitable for nail salons and for soldering. The listing says it has CE and FCC certificates. Our product photo shows a long flexible black hose with a flat nozzle, a funnel nozzle and 10 spare filter pads.
Who it's for
It suits a nail tech who wants to pull vapors and dust away from one table at the source. It is not a downdraft dust collector built into a table, and it is not a room ventilation system.
How it fits the station
Put the unit beside the table and bring the nozzle close to the client's hand, a few inches from where you file or apply product. Source capture works best when the intake is close. Change filters on the schedule the manual gives. OSHA says "Ventilation is the best way to lower the level of chemicals in a salon." It adds that NIOSH laboratory tests indicate exhaust ventilation systems "may reduce worker chemical exposure in nail salons by at least 50%," and suggests portable ventilation machines to remove dust and chemicals from the work area. A desk unit is one part of that; OSHA still asks for fresh air, a working exhaust or HVAC fan, and good work practices.
What we don't repeat from the listing
The listing makes claims about clearing smoke within seconds, energy savings and workplace compliance. It gives no test data for nail products, so we leave them out.
What the listing doesn't say
It does not name the filter media in each layer, give a noise level, or say how often filters need changing. It does not say whether the filters capture acrylic monomer vapor, which would need a chemical (adsorbent) stage.
Flaws but not dealbreakers
The listing does not say where the 255 m³/h figure is measured, and a long hose usually lowers airflow at the nozzle. Spare filters are an ongoing cost.
How we evaluated this
We compared the listing's stated specs with what OSHA and NIOSH say about nail salon ventilation. This review has no hands-on notes yet.
Ready to buy
NLVYPRO Desktop Fume Extractor, 105W, 255 m³/h, 3-Layer Filtration
Click through to Amazon for the live price. We do not display Amazon prices on this site.
Affiliate link · Price set by Amazon
- 255 m³/h (about 150 CFM) airflow from a 105W brushless motor, per the listing
- 3-layer filtration with 13 filters
- Long flexible black hose with a flat nozzle and a funnel nozzle for source capture
- LCD display and remote control
- Listed mainly for soldering smoke; no nail-product test data
- Filter media, noise level and change interval are not stated
- Does not replace room ventilation
- Best for
- Source capture of vapors and dust at a single nail table
- Format
- Desktop · 105W brushless · 255 m³/h · 3-layer, 13 filters
- Power
- 105W brushless
- Airflow
- About 150 CFM (255 m³/h)
- Filtration
- 3-layer · 13 filters
- Hose
- Long flexible hose · flat nozzle + funnel nozzle
- Control
- LCD display + remote control
- In the box
- 10 spare filter pads · remote
- Certificates
- CE and FCC (per listing)
- Noise level
- Not stated on listing
Quick answers
What people ask about this one.
Do you need a fume extractor for a nail salon?
You need good ventilation; a fume extractor for nail salon tables is one way to add source capture. OSHA calls ventilation the best way to lower chemical levels in a salon.
Are nail salon fumes toxic?
Some can be harmful. OSHA lists nail product chemicals, such as acetone, toluene and acrylic liquids, that can cause headaches and irritate the eyes, nose and throat. Ventilation, gloves and closed bottles lower exposure.
What does a desktop fume extractor do?
It pulls air through a hose near your work and passes it through filters. It captures at the source, but it does not replace room ventilation.
This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. The price you pay is exactly the same as if you'd navigated to Amazon directly. Per Amazon's Operating Agreement, we do not display Amazon prices on this site — they change hourly.
More from this lane.
2-in-1 Facial Steamer with 5X Magnifying Lamp
This facial steamer with magnifying lamp puts a steamer and a 5X LED lens on one stand, 32 to 41 inches tall. It needs its own floor space.
30 in. 5-Drawer Mechanic's Cart, White Steel
The US General 30 in. 5 drawer mechanic's cart is white steel tool storage some nail techs use. The listing has a title and no specs.
Black and Gold Salon Trolley Cart with Drawers and Cabinet
A black and gold salon trolley cart with drawers, a storage cabinet and wheels. It is sold for hair stylists; the listing gives no dimensions.