Lou Essentials is reader-supported. As an Amazon Associate we earn from qualifying purchases.

Back to Reviews

Salon-Supply Pick · Pedicure · MZCMSL

MZCMSL Pedicure Sanding Discs, 150-Pack with Bit (80/150/240 Grit)

A complete starting kit if you want to try disc-based callus work on an e-file: three grits and the bit in one box. Confirm the bit fits your drill first, because the listing leaves the shank size out.

By NailLou Salon ·

Clear three-compartment case of black sanding discs, three loose discs and a metal disc bit on a charcoal surface — Lou Essentials

Illustrative image

The short answer

150 φ25mm pedicure sanding discs in three grits plus one metal bit, for e-file callus work. The listing does not give the bit's shank size.

Best for
Starting disc-based e-file callus work
Format
150 discs (50 × #80, #150, #240) + 1 metal bit · φ25mm
Watch for
The listing does not state the bit's shank size

As an Amazon Associate we earn from qualifying purchases. Click through to Amazon for the live price. We do not display Amazon prices on this site.

Disclosure. Every Amazon link on this page is an Associates affiliate link. As an Amazon Associate we earn from qualifying purchases — at no extra cost to you.

What it is

The MZCMSL kit holds 150 adhesive sandpaper discs and one metal bit, all φ25mm. The discs come in three grits: 50 of #80 (coarse), 50 of #150 (medium) and 50 of #240 (fine). The listing title says they are for callus and dead skin on a foot file.

Who it's for

It is for pedicurists starting with disc-based e-file work, or anyone who wants three grits in one order. If you already own 25mm bits, the discs alone are the part you will use up.

How it fits the station

Work on dry skin. Start with the #80 disc on thick callus, move to #150 to even out the surface, and finish with #240. Use a fresh disc for each client and throw the used one away. Clean and disinfect the metal bit as your disinfectant's label directs between clients. Take callus down gradually; removing too much can leave the skin sore.

What the listing doesn't say

The listing does not give the bit's shank size, the bit's metal, or a recommended drill speed. It does not say whether the discs are sold as refills on their own.

Flaws but not dealbreakers

One bit means you peel off a disc to change grit mid-service. Disc quality from pack to pack is not something the listing addresses.

Compared with the 2-pack of bits

The MZCMSL 2-pack adds two Φ25mm bits for 3/32 shank drills and contains no discs. Together, the kit and the 2-pack let you keep two grits loaded.

How we evaluated this

We compared the listing's stated specs with what e-file callus work needs. This review has no hands-on notes yet.

Ready to buy

MZCMSL Pedicure Sanding Discs, 150-Pack with Bit (80/150/240 Grit)

Click through to Amazon for the live price. We do not display Amazon prices on this site.

View on Amazon

Affiliate link · Price set by Amazon

What we like
  • 150 discs split evenly across three grits: #80, #150 and #240
  • One metal bit included, so the kit works out of the box
  • φ25mm size matches the MZCMSL 2-pack of bits
What we don't
  • The listing does not state the bit's shank size
  • Only one bit, so changing grit mid-service means changing the disc
The Specs
Best for
Starting disc-based e-file callus work
Format
150 discs (50 × #80, #150, #240) + 1 metal bit · φ25mm
Discs
150 (50 × #80, 50 × #150, 50 × #240)
Bit
1 metal bit included
Size
φ25mm
Shank
Not stated on listing

Quick answers

What people ask about this one.

What grit pedicure sanding disc should I use for calluses?

Start with a coarse #80 disc on thick callus, then refine with #150 and finish with #240. This kit includes 50 discs of each.

Are pedicure sanding discs single-use?

Yes, treat them as single-use: peel off and discard the disc after each client. The metal bit is reusable after cleaning and disinfection.

Will this pedicure sanding disc kit fit my nail drill?

The discs and bit are φ25mm, but the listing does not give the bit's shank size. Check it against your handpiece, or use the MZCMSL bits listed for 3/32 shanks.

How we evaluate every product →

Disclosure

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. The price you pay is exactly the same as if you'd navigated to Amazon directly. Per Amazon's Operating Agreement, we do not display Amazon prices on this site — they change hourly.